|
|
 |
Fixing parquet
- SCREED
Cementitious mortar screed at least 3 cm thick made of quickly evaporating, quick-setting binder such as TIMER-2 by Technokolla or quickly evaporating and normally setting binder such as KRONOS by Technokolla, plus siliceous aggregates with 0 to 8 mm continuous grain size, reinforced with synthetic fibers and/or metal netting. The resistance of screeds made of TIMER-2 must be ≥ 25 N/mm2 after 24 hours and ≥ 45 N/mm2 after 28 days, while it must be possible to fix the solid and/or pre-finished parquet 24 hours after application. The resistance of screeds made of KRONOS must be ≥ 30 N/mm2 after 28 days, while it must be possible to fix the solid and/or pre-finished parquet 10-15 days after application. Screed reinforcing with fibers such as FS-18 by Technokolla and/or 5x5 cm mesh galvanized metal netting with 2 mm diameter wire installed at 1/3rd of the screed thickness.
Dosage for 1 m3 of 0 to 8 mm aggregate:
350 kg TIMER-2, 160 l water,
1 kg
FS-18 fibers
250 kg KRONOS,
150 l water, 1 kg FS-18 fibers
- FLOORING
Wooden flooring on screeds made of KRONOS with residue humidity not exceeding 2%, using two-pack epoxy-polyurethane adhesive such as WD-900 or WD-GEO by Technokolla.
Amount of adhesive required:
1-1.2 kg/m2
|
 |
|
